Main Menu

Press 411-ZONES to get your serial number

411 Screen

Note Serial Number. Log on to PERC Web site, Edit our ReplayTVconfig and add it. Pres EXIT to return to main menu.

ReplayTV Screen

Press MENU on your remote

Main Menu

Select "SETUP".

Setup Screen

Select "Change Dialing & Input Settings".

Setup Summary

Select "Change Telephone".

Telephone Connection

Change phone prefix (to anything).

Zip Code

Change zip code (to anything).

Dialing Prefix

set to 1972xxxxxxx (drop 1 if in Dallas) ReplayTV 5xxxx units see instructions.

Connecting!

The Replay should dial in .

Service PHone Number

Pick one.

Dialing Method

Pick one (only matters if you remove the Dialing Prefix).

Configure Line 1

Nothing for me

Configure Line 2

Nothing for me

Configure ANT/CATV

I have analog cable.

Cable Providers

I use Time Warner, this lineup was first added on the PERCDATA web site.

Setup Summary

Keep your new settings!.

Done

Your ReplayTV should dial in and get guide data now.

• Power cycle your ReplayTV to clear the DNS cache.
• On the ReplayTV main screen select setup.
• Dialup units
  • Use 411-Zones to get your serial number and edit a device on the Perc web page.
    (There's no chance of auto-configuration like network based units)
  • You will need to make a long distance call to Dallas, TX. (~5-15 min/day)
  • We are looking into other dialup options
  • Select Setup: telephone. Change your zip and phone to something different
  • At the "prepend digits" prompt, enter 1972xxxxxxx (drop the 1 if in Dallas)
  • Special info for 5xxx models
    • ReplayTV 5xxx units only allow 6 "prepend digits" so this won't work.
    • For these models, if you do a network connect to Perc, it will set the phone number
    • Another option is to dial from another phone, but timing is tricky
    • To use another phone you'll want to disable dial tone detection
    • To disable dial-tone detection, press "ZONES" on the "predial digits" screen.
• The system should connect and provide lineup choices